Crummy Cube with a View Storage Closet

Materials: Trofast frame pine, Trofast storage boxes, wooden closet rod, 4) 4x4x1 wood blocks, 4) 2" rigid casters, Lansa handle, stainless coat hooks, coat hangers, misc screws, oil based paint, and an electric drill for pilot holes

Description: My daughter recently moved into a new office cube with a window. Having a window was definitely an upgrade but the building support beam, not so much. She lost valuable desk and drawer space to store all of her required work gear. The little cubby hole on the other side of the beam was too narrow and deep for any cabinet we could find. Searching my Ikea catalog, I came across the Trofast frame. If we turned it sideways it would just fit into that little spot.

I bought the Trofast frame in pine so it was not as heavy for her and easier to paint than the white one. I put it together per the instructions then added a piece of wooden closet rod at the top. I drilled a pilot hole through the frame and into the rod then screwed it in place with 2 1/2" screws.

At the bottom I attached a 4x4x1 inch block of wood flat in each corner under the frame with screws. The 2" casters were screwed on to the wooden blocks raising it just off the floor. In another situation, I would have preferred larger wheels but I wanted to keep it as low profile as possible.

I lightly sanded and painted the whole thing with dark brown oil based paint for a more durable finish. After it dried for a few days, I added a 7" Lansa handle to the outside front (in this case). The frame was not quite as deep as the cubby hole so I added two coat hooks to the outside back for a little extra storage. And I added a couple of Trofast storage boxes.

Now she has a rolling closet to store all of her jackets, boots and other gear. It works great. She pulls it out when she needs something, then pushes it back and it's out of the way. And she loves the view too!

~ Karen Snow, South Houston, Texas