LEGO Dioder Lamp

Materials: Dioder LED light

Description: This is a hanging lamp containing the Dioder light system inside it. My aim was to make a hanging lamp out of LEGO pieces that I can control just like a normal lamp. As I am not an electrician, I did not wanted to cut off the cables of the lamp but to do it the most easiest way possible.

What I used:
Approx. 500 LEGO bricks
An orange textile power chord
A power plug

So my solution was developed like this:

STEP 1 - The Lamp itself
As we are talking about LEGO, you can design your lamp just the way you would like to. I wanted a lamp that fits on my eating table, so mine is of the size of 87x8x13.5cm

The only thing you should be aware of: more LEGO bricks mean more weight. Consider this as the hanging hook or whatever system you will use can handle this weight.
Enough talk: construct your lamp. If you are about to use the Dioder system that I used, please plan enough space for the long power cable and the plug. In my solution, I made a basement exactly at the middle of the lamp inside it, so that I could simple put the cable and plug on there.

STEP 2 - The ceiling power cable
TURN YOUR POWER OFF! And check twice that it really is turned off! Attach the textile chord to the power cables from the ceiling. Insert a hook in the ceiling right where you want your lamp to hang above and pull the textile cable through this hook. For safety reasons i make a knot here, just in case that the lamp might fall of for whatever reason.

Now attach the plug to the chord and insert the Dioder in it to see if it works. Hopefully it won't work, because you have not turned on your power on again! So turn your power on and if you attached it correctly then there should be light.
TURN IT OFF AGAIN - just for safety reasons.

STEP 3 - The plug in the lamp
Now put the Dioder system inside the lamp on the bricks-base you build. In my solution I built some kind of "dome" around the plug so that even these bricks can work as hanging system that does make the plug hang inside the lamp. Depending on your design you certainly will find some way to attach the plug or the chord to the bricks.

At the moment I do not own black LEGO plates, but started collecting them so that I can close the upper part of the lamp with them.

See more of the LEGO Dioder lamp.

~ Carlos Pinto, Hamburg, Germany